Home Company News How to remove nail free glue?

How to remove nail free glue?

by admin

in fact, there are many ways to remove nail free glue. First use the blade to separate the colloid at the joint, and he will naturally separate. It can also be heated, and then the nail free glue will lose contact when it is hot, and then blow it with a hair dryer. Generally, when cleaning, whether it is using degreasing water or vinegar, these products must be completely Pro glue free nail marks before they can be easily and effectively removed.

1. Firstly, you can scratch with a blade, and the colloid at the separated bonding part can be stripped

2. In case of colloid with strong viscosity, you can use a hair dryer to heat the colloid

3. Make the nail free adhesive lose its viscosity and remove it

4. In addition, you can use soapy water and a little mixture of ammonia and turpentine

5. This can remove the nail free glue more effectively

method for removing nail free adhesive:

1 Scrape the colloid at the separated bonding part with a blade to peel it off

2. When heated, the nail glue will not lose its viscosity in case of heat. Blow with a hair dryer

3. Soap with a little mixture of ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny

4. You can take a piece of dry cloth covered with vinegar to cover the whole nail free glue mark. After the nail free glue is completely wet, you can easily remove it with a ruler

5. When removing, whether using polishing water or vinegar, these products must be completely soaked without nail glue marks, so that they can be easily and effectively removed

6. When the nail free adhesive has not yet solidified, it can be removed by loosening and saving water, and it can be removed by scraping or sanding after drying

when the nail free adhesive has not solidified, it can be removed by loosening and saving water. After dry consolidation, it can be removed by scraping or sanding. The specific operations are as follows:

1. If it is mistakenly adhered to the glass surface, you can use soapy water plus a little mixed liquid of ammonia and turpentine, which can not only remove the mistakenly adhered nail free glue, but also make the glass surface more shiny

2. You can cover the whole place with nail free glue with cloth covered with vinegar. After the whole nail free glue trace is soaked with vinegar, you can easily brush off the nail free glue with a small brush

3. If there are no ammonia, vinegar and other items at home. The cured nail free adhesive can be softened by heating, and the hot air of the hair dryer can be used to blow the nail free adhesive. When the nail free glue softens and the viscosity becomes low, it can be removed

4. If you have cleaned most of the nail free glue, but there are still some small marks that cannot be removed, you can use the nail remover that every little girl should have. Apply the nail remover on the gel surface and wipe it off in a few minutes, and the effect is also obvious

5. There are two simple and crude methods to remove nail free glue. If the nail free adhesive wall is scratch resistant, you can directly scrape off the nail free adhesive with a knife. In addition, the adhesive tape with good viscosity can be used to remove it repeatedly, and the nail free adhesive can also be removed

6. Tips: no matter using ammonia or vinegar, the best removal effect can be achieved only when the liquid is completely saturated with nail free glue

finally, the most important point is that when using nail free glue, you should be careful when you want to stick it. If you stick it wrong, it will be troublesome, time-consuming and laborious

extended data:

dry bonding method: (suitable for joints with lighter materials and light bearing capacity)

1. Extrude several lines of zigzag nail free adhesive at a distance of 20-40 cm;

2. Press the side with nail free glue on the bonding place, gently pull it apart and let the glue volatilize for 2-5 minutes

3. Then press the two sides tightly

wet bonding method: (suitable for places only under great pressure and used with clamp tools)

1. Apply nail free adhesive and nail free adhesive according to dry bonding method;

2. Screw the two sides of the adhesive immediately with pliers, nails or screws;

3. After the glue solidifies (24 hours), remove the clamp and complete curing time (24-72 hours)

bonding method of load-bearing materials: first bond and press the load-bearing materials, then separate them, wait for drying for about 5 minutes, and then firmly press and knock the materials to be bonded again to put them in place. If necessary, it can be supported by brace

reference: Baidu Encyclopedia – nail free glue

1. If it is mistakenly adhered to the glass surface, you can use soapy water plus a little mixed liquid of ammonia and turpentine, which can not only remove the mistakenly adhered nail free glue, but also make the glass surface more shiny
2. You can use a cloth covered with vinegar to cover the whole place where the nail free glue is stuck. After the whole nail free glue trace is soaked with vinegar, you can easily brush off the nail free glue with a small brush
3.
if there are no ammonia, vinegar and other items at home. The cured nail free adhesive can be softened by heating, and the hot air of the hair dryer can be used to blow the nail free adhesive. When the nail free glue softens and the viscosity becomes low, it can be removed
4.
if you have cleaned most of the nail free glue, but still have some small marks that cannot be removed, you can use the nail remover that every little girl should have. Apply the nail remover on the colloidal surface and wipe it off in a few minutes, and the effect is also obvious
5.
there are two simple and crude methods to remove nail free glue. If the nail free adhesive wall is scratch resistant, you can directly scrape off the nail free adhesive with a knife. In addition, the adhesive tape with good viscosity can be used to remove it repeatedly, and the nail free adhesive can also be removed
6.
tips: no matter using ammonia or vinegar, the best removal effect can be achieved only when the liquid is completely soaked with nail free glue
extended data:
instructions for use
clean the construction surface to ensure that there is no oil or dust
cut the nozzle, install the nozzle and extrude it with a sealing gun
bonding method of load-bearing materials:
it can directly bond load-bearing materials. First bond the load-bearing materials together, then separate them, wait for drying for about 5 minutes, and then firmly press and knock the materials to be bonded again to put them in place. If necessary, it can be supported by brace. (heavy materials must be supported)
dry bonding method: (ceiling line, skirting line, door frame, background wall)
1 Extrude zigzag adhesive along the bonding surface
2. Squeeze the adhesive side to the surface to be adhered, and press the two sides tightly
3. Pull apart the two bonding surfaces and let the strong glue of the liquid nail volatilize for 2-5 minutes
after 4.2-5 minutes, press again and tap gently along the joint
5. Temporarily fix the adhesive with auxiliary tools and cancel the auxiliary fixation after 24 hours
6.the best bonding effect can be achieved within 24 hours and completely cured within 2-3 days
wet bonding method: (wood floor, marble table and other large materials)
1 Apply liquid nail adhesive according to dry bonding method
2. Press the bonding surface tightly, the best bonding effect can be achieved within 24 hours, and it can be completely cured within 2-3 days
fast adhesive liquid nail has super fast adhesion, especially on multi surface. As long as any surface is multi hollow structure, it can achieve fast bonding effect without any auxiliary device in the bonding process
removal method
when the nail free adhesive has not solidified, it can be removed by loosening and saving water, and can be removed by scraping or sanding after dry consolidation
reference: nail free glue – Baidu Encyclopedia

related posts

Leave a Comment